NETGEAR GSM7228PS - Show Sntp; Show Sntp Client

Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-38
v1.0, July 2010
Zone name: A name to associate with the time zone
Hours-offset: Number of hours difference with UTC
Minutes-offset: Number of minutes difference with UTC
no clock timezone
This command sets the switch to UTC time.
show sntp
This command is used to display SNTP settings and status.
show sntp client
This command is used to display SNTP client settings.
Format no clock timezone
Mode Global Config
Format show sntp
Mode Privileged EXEC
Term Definition
Last Update
Time
Time of last clock update.
Last Unicast
Attempt Time
Time of last transmit query (in unicast mode).
Last Attempt
Status
Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and
processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been received and
processed by the SNTP client since last reboot.
Format show sntp client
Mode Privileged EXEC