Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-70
v1.0, July 2010
priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The <timeout> parameter has
a range of 1-30 and is the timeout value in seconds.
show tacacs
Use the show tacacs command to display the configuration and statistics of a TACACS+
server.
Default 0
Format priority
<priority>
Mode TACACS Config
Format timeout
<timeout>
Mode TACACS Config
Format show tacacs
[<ip-address|hostname>]
Mode Privileged EXEC
Term Definition
Host Address The IP address or hostname of the configured TACACS+ server.
Port The configured TACACS+ server port number.
TimeOut The timeout in seconds for establishing a TCP connection.
Priority The preference order in which TACACS+ servers are contacted. If a server
connection fails, the next highest priority server is contacted.
To Next Page
Loading...
