NETGEAR GSM7228PS - Show Lldp Statistics

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-176
v1.0, July 2010
show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
The table contains the following column headings:
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt Shows whether the interface transmits system management address information in the
LLDPDUs.
Format show lldp statistics
{<unit/slot/port> | all}
Mode Privileged Exec
Term Definition
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to
Live interval expired.
Term Definition
Interface The interface in unit/slot/port format.
Transmit Total Total number of LLDP packets transmitted on the port.
Receive Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port for any reason.
Term Definition