EasyManua.ls Logo

NETGEAR GSM7228PS - Ip Dhcp Snooping Log-Invalid; Ip Dhcp Snooping Trust

NETGEAR GSM7228PS
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-124
v1.0, July 2010
ip dhcp snooping log-invalid
Use this command to control the logging DHCP messages filtration by the DHCP Snooping
application.
no ip dhcp snooping log-invalid
Use this command to disable the logging DHCP messages filtration by the DHCP Snooping
application.
ip dhcp snooping trust
Use this command to configure the port as trusted.
no ip dhcp snooping trust
Use this command to configure the port as untrusted.
Format no ip dhcp snooping limit
Mode Interface Config
Default disabled
Format ip dhcp snooping log-invalid
Mode Interface Config
Format no ip dhcp snooping log-invalid
Mode Interface Config
Default disabled
Format ip dhcp snooping trust
Mode Interface Config

Table of Contents

Other manuals for NETGEAR GSM7228PS

Related product manuals