NETGEAR GSM7228PS - Show Spanning-Tree Brief

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-24
v1.0, July 2010
show spanning-tree brief
This command displays spanning tree settings for the bridge. The following information appears.
Root Port
Bridge Forward
Delay
Derived value.
Hello Time Configured value of the parameter for the CST.
Bridge Hold
Time
Minimum time between transmission of Configuration Bridge Protocol Data Units
(BPDUs).
Bridge Max
Hops
Bridge max-hops count for the device.
CST Regional
Root
Bridge Identifier of the CST Regional Root. It is made up using the bridge priority and the
base MAC address of the bridge.
Regional Root
Path Cost
Path Cost to the CST Regional Root.
Associated
FIDs
List of forwarding database identifiers currently associated with this instance.
Associated
VLANs
List of VLAN IDs currently associated with this instance.
Format show spanning-tree brief
Mode • Privileged EXEC
• User EXEC
Term Definition
Bridge Priority Configured value.
Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the
bridge priority and the base MAC address of the bridge.
Bridge Max Age Configured value.
Bridge Max Hops Bridge max-hops count for the device.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs).
Term Definition