NETGEAR GSM7228PS - Clear Igmpsnooping; Clear Pass; Clear Port-Channel; Clear Traplog

Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-28
v1.0, July 2010
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to delete
these entries from the Multicast Forwarding Database.
clear pass
This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
clear port-channel
This command clears all port-channels (LAGs).
clear traplog
This command clears the trap log.
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format clear igmpsnooping
Mode Privileged EXEC
Format clear pass
Mode Privileged EXEC
Format clear port-channel
Mode Privileged EXEC
Format clear traplog
Mode Privileged EXEC
Format clear vlan
Mode Privileged EXEC