Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-27
v1.0, July 2010
ip igmp version
This command configures the version of IGMP for an interface. The value for <version> is
either 1, 2 or 3.
no ip igmp version
This command resets the version of IGMP to the default value
.
ip igmp last-member-query-count
This command sets the number of Group-Specific Queries sent before the router assumes that
there are no local members on the interface. The range for <count> is 1 to 20.
no ip igmp last-member-query-count
This command resets the number of Group-Specific Queries to the default value.
Default 3
Format ip igmp version <version>
Modes Interface Config
Format no ip igmp version
Modes Interface Config
Format ip igmp last-member-query-count <count>
Modes Interface Config
Format no ip igmp last-member-query-count
Modes Interface Config
To Next Page
Loading...
