Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-95
v1.0, July 2010
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
lacp actor admin state longtimeout
Use this command to set LACP actor admin state to longtimeout.
Format lacp actor admin state individual
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp actor admin state individual
Mode Interface Config
Format lacp actor admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
To Next Page
Loading...
