NETGEAR GSM7228PS - Show Authentication Methods; Show Dot1 X

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-72
v1.0, July 2010
show authentication methods
This command displays information about the authentication methods.
The following is an example of this command:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on the
tokens used.
If you do not use the optional parameters <unit/slot/port> or <vlanid>, the command
displays the global dot1x mode and the VLAN Assignment mode.
Format show authentication methods
Mode Privileged EXEC
Format show dot1x
[{summary {<unit/slot/port> | all} | detail <unit/slot/
port> | statistics <unit/slot/port>]
Mode Privileged EXEC