NETGEAR GSM7228PS - Area Nssa No-Redistribute (Ospf); Area Nssa No-Summary (Ospf)

Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-43
v1.0, July 2010
no area nssa default-info-originate (OSPF)
This command disables the default route advertised into the NSSA.
area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned external routes will
not be redistributed to the NSSA.
no area nssa no-redistribute (OSPF)
This command disables the NSSA ABR so that learned external routes are redistributed to the
NSSA.
area nssa no-summary (OSPF)
This command configures the NSSA so that summary LSAs are not advertised into the NSSA.
no area nssa no-summary (OSPF)
This command disables nssa from the summary LSAs.
Format no area <areaid> nssa default-info-originate [<metric>] [{comparable
| non-comparable}]
Mode Router OSPF Config
Format area <areaid> nssa no-redistribute
Mode Router OSPF Config
Format no area <areaid> nssa no-redistribute
Mode Router OSPF Config
Format area <areaid> nssa no-summary
Mode Router OSPF Config
Format no area <areaid> nssa no-summary
Mode Router OSPF Config