NETGEAR GSM7228PS User Manual

Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-3
v1.0, July 2010
no network ipv6 address
Use this command to remove IPv6 prefixes on the network port interface. The command no
network ipv6 address removes all IPv6 prefixes.
network ipv6 gateway
Use this command to configure IPv6 gateway (i.e. default routers) information for the network
port.
no network ipv6 gateway
Use this command to remove IPv6 gateways on the network port interface.
Parameter Description
address IPv6 prefix in IPv6 global address format.
prefix-length IPv6 prefix length value
eui64 Formulate IPv6 address in eui64 format
Format no network ipv6 address <address>/<prefix-length> [eui64]
Mode Privileged EXEC
Format network ipv6 gateway <gateway-address>
Mode Privileged EXEC
Parameter Description
gateway-
address
Gateway address in IPv6 global or link-local address format.
Format no network ipv6 gateway
Mode Privileged EXEC

NETGEAR GSM7228PS Specifications

General

Brand	NETGEAR
Model	GSM7228PS
Category	Switch
Language	English