NETGEAR GSM7228PS - User Max-Bandwidth-Down; User Max-Bandwidth-Up

Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-27
v1.0, July 2010
no user idle-timeout
Use this command to reset the idle timeout to the default value.
user max-bandwidth-down
Use this command to configure the bandwidth at which the client can receive data from the
network. <1-128> is the user ID. The range of bps is <0-536870911> bps. 0 indicates use global
configuration.
no user max-bandwidth-down
Use this command to reset the limit to the default.
user max-bandwidth-up
Use this command to configure the bandwidth at which the client can send data into the Network.
<1-128> is the user ID . The range of bps is <0-536870911> bps. 0 indicates use global
configuration.
Format no user <1-128> idle-timeout timeout
Mode Captive Portal Configuration mode
Default 0
Format user <1-128> max-bandwidth-down bps
Mode Captive Portal Configuration mode
Format no user <1-128> max-bandwidth-down
Mode Captive Portal Configuration mode
Default 0
Format user <1-128> max-bandwidth-up bps
Mode Captive Portal Configuration mode