Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-46
v1.0, July 2010
area stub no-summary (OSPF)
This command configures the Summary LSA mode for the stub area identified by <areaid>.
Use this command to prevent LSA Summaries from being sent.
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
<areaid>.
area virtual-link (OSPF)
This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Default disabled
Format area <areaid> stub no-summary
Mode Router OSPF Config
Format no area <areaid> stub no-summary
Mode Router OSPF Config
Format area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
Format no area <areaid> virtual-link <neighbor>
Mode Router OSPF Config
To Next Page
Loading...
