NETGEAR GSM7228PS - Lldp Med All; Lldp Med Confignotification All

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-183
v1.0, July 2010
no lldp med transmit-tlv
Use this command to remove a TLV.
lldp med all
Use this command to configure LLDP-MED on all the ports
no lldp med all
Use this command to remove LLDP-MD on all ports.
lldp med confignotification all
Use this command to configure all the ports to send the topology change notification.
no lldp med confignotification all
Use this command to disable all the ports to send the topology change notification.
Format no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse]
[ex-pd] [location] [inventory]
Mode Interface Config
Format lldp med all
Mode Global Config
Format no lldp med all
Mode Global Config
Format lldp med confignotification all
Mode Global Config
Format no lldp med confignotification all
Mode Global Config