Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-174
v1.0, July 2010
no lldp notification
Use this command to disable notifications.
lldp notification-interval
Use this command to configure how frequently the system sends remote data change notifications.
The <interval> parameter is the number of seconds to wait between sending notifications. The
valid interval range is 5-3600 seconds.
no lldp notification-interval
Use this command to return the notification interval to the default value.
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
Default disabled
Format no lldp notification
Mode Interface Config
Default 5
Format lldp notification-interval <interval>
Mode Global Config
Format no lldp notification-interval
Mode Global Config
Format clear lldp statistics
Mode Privileged Exec
To Next Page
Loading...
