NETGEAR GSM7228PS - Set Igmp Mrouter

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-144
v1.0, July 2010
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode enabled.
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format set igmp mcrtrexpiretime <0-3600>
Mode • Global Config
• Interface Config
Format set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
Format no set igmp mcrtrexpiretime
Mode • Global Config
• Interface Config
Format no set igmp mcrtrexpiretime <vlan_id>
Mode VLAN Config
Format set igmp mrouter <vlan_id>
Mode Interface Config
Format no set igmp mrouter <vlan_id>
Mode Interface Config