Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-13
v1.0, July 2010
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning
tree (MSTP) BPDUs. Use the <unit/slot/port> parameter to transmit a BPDU from a
specified interface, or use the all keyword to transmit BPDUs from all interfaces. This command
forces the BPDU transmission when you execute it, so the command does not change the system
configuration or have a “no” version.
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of up to 32 characters.
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Default disabled
Format no spanning-tree bpduguard
Mode Global Config
Format spanning-tree bpdumigrationcheck {<unit/slot/port> | all}
Mode Global Config
Default base MAC address in hexadecimal notation
Format spanning-tree configuration name
<name>
Mode Global Config
Format no spanning-tree configuration name
Mode Global Config
To Next Page
Loading...
