NETGEAR GSM7228PS - Show Ipv6 Ospf Interface

Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-61
v1.0, July 2010
show ipv6 ospf interface
This command displays the information for the IFO object or virtual interface tables.
Term Definition
Router Total number of router LSAs in the OSPFv3 link state database.
Network Total number of network LSAs in the OSPFv3 link state database.
Inter-area Prefix Total number of inter-area prefix LSAs in the OSPFv3 link state database.
Inter-area
Router
Total number of inter-area router LSAs in the OSPFv3 link state database.
Type-7 Ext Total number of NSSA external LSAs in the OSPFv3 link state database.
Link Total number of link LSAs in the OSPFv3 link state database.
Intra-area Prefix Total number of intra-area prefix LSAs in the OSPFv3 link state database.
Link Unknown Total number of link-source unknown LSAs in the OSPFv3 link state database.
Area Unknown Total number of area unknown LSAs in the OSPFv3 link state database.
AS Unknown Total number of as unknown LSAs in the OSPFv3 link state database.
Type-5 Ext Total number of AS external LSAs in the OSPFv3 link state database.
Self-Originated
Type-5
Total number of self originated AS external LSAs in the OSPFv3 link state database.
Total Total number of router LSAs in the OSPFv3 link state database.
Format show ipv6 ospf interface {<unit/slot/port> | loopback <loopback-id> |
tunnel <tunnel-id>}
Modes • Privileged EXEC
• User EXEC
Term Definition
IPv6 Address The IPv6 address of the interface.
ifIndex The interface index number associated with the interface.
OSPF Admin
Mode
Shows whether the admin mode is enabled or disabled.
OSPF Area ID The area ID associated with this interface.
Router Priority The router priority. The router priority determines which router is the designated router.