NETGEAR GSM7228PS - Show Port-Channel

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-111
v1.0, July 2010
For each port-channel the following information is displayed:
show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
For each port-channel the following information is displayed:
Term Definition
Logical
Interface
The unit/slot/port of the logical interface.
Port-channel
Name
The name of port-channel (LAG) interface.
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or dynamically maintained.
Mbr Ports The members of this port-channel.
Active Ports The ports that are actively participating in the port-channel.
Format show port-channel
Mode • Privileged EXEC
• User EXEC
Term Definition
Static
Capability
This field displays whether or not the device has static capability enabled.
Term Definition
Name This field displays the name of the port-channel.
Link-State Shows whether the link is up or down.
Mbr Ports This field lists the ports that are members of this port-channel, in <unit/slot/port> notation.
Active Ports The ports that are actively participating in the port-channel.