NETGEAR GSM7228PS - Port Lacptimeout (Global Config)

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-105
v1.0, July 2010
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner) to
either long or short timeout.
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or
partner) back to their default values.
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Interface Config
Format no port lacptimeout {actor | partner}
Mode Interface Config
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Global Config
Format no port lacptimeout {actor | partner}
Mode Global Config