Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-106
v1.0, July 2010
port-channel adminmode
This command enables a port-channel (LAG). This command sets every configured port-channel
with the same administrative mode setting.
no port-channel adminmode
This command disables a port-channel (LAG). This command clears every configured port-
channel with the same administrative mode setting.
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical
unit/slot/port for a configured port-channel. The option all
enables link trap notifications for
all the
configured port-channels.
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option all disables link trap notifications
for all the configured port-channels.
Format port-channel adminmode all
Mode Global Config
Format no port-channel adminmode [all]
Mode Global Config
Default enabled
Format port-channel linktrap {<logical unit/slot/port> | all}
Mode Global Config
Format no port-channel linktrap {<logical unit/slot/port> | all}
Mode Global Config
To Next Page
Loading...
