NETGEAR GSM7228PS - Show Ip Pimdm Interface Stats; Show Ip Pimdm Neighbor

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-15
v1.0, July 2010
show ip pimdm interface stats
This command displays the statistical information for PIM-DM on the specified interface.
show ip pimdm neighbor
This command displays the neighbor information for PIM-DM on the specified interface.
Format show ip pimdm interface stats {<unit/slot/port> | all}
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
IP Address The IP address that represents the PIM-DM interface.
Nbr Count The neighbor count for the PIM-DM interface.
Hello Interval The time interval between two hello messages sent from the router on the given interface.
Designated
Router
The IP address of the Designated Router for this interface.
Format show ip pimdm neighbor {<unit/slot/port> | all}
Modes • Privileged EXEC
• User EXEC
Term Definition
Neighbor
Address
The IP address of the neighbor on an interface.
Interface Valid unit, slot, and port number separated by forward slashes.
Up Time The time since this neighbor has become active on this interface.
Expiry Time The expiry time of the neighbor on this interface.