NETGEAR GSM7228PS - Clear Ip Dhcp Binding; Clear Ip Dhcp Conflict; Clear Ip Dhcp Server Statistics

Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-51
v1.0, July 2010
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used
as the address parameter.
Format no ip dhcp conflict logging
Mode Global Config
Format clear ip dhcp binding {<address> | *}
Mode Privileged EXEC
Format clear ip dhcp server statistics
Mode Privileged EXEC
Default none
Format clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC