Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-14
v1.0, July 2010
The following shows example CLI display output.
(Switch) #show process cpu
Memory Utilization Report
status bytes
------ ----------
free 192980480
alloc 53409968
Task Utilization Report
Task Utilization
----------------------- -----------
bcmL2X.0 0.75%
bcmCNTR.0 0.20%
bcmLINK.0 0.35%
DHCP snoop 0.10%
Dynamic ARP Inspection 0.10%
dot1s_timer_task 0.10%
dhcpsPingTask 0.20%
show mbuf total
This command shows the total system buffer pools status.
The following shows an example of CLI display output for the command.
(switch) #show mbuf total
mbufSize 9284 (0x2444)
Current Time 0x1897fa
Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU
busy.
Format show process cpu
Mode Privileged EXEC
Format show rmbuf total
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
