Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-20
v1.0, July 2010
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed.
Router Discovery Protocol Commands
This section describes the commands you use to view and configure Router Discovery Protocol
settings on the switch. The Router Discovery Protocol enables a host to discover the IP address of
routers on the subnet.
ip irdp
This command enables Router Discovery on an interface.
no ip irdp
This command disables Router Discovery on an interface.
Format show ip stats
Modes • Privileged EXEC
• User EXEC
Default disabled
Format ip irdp
Mode Interface Config
Format no ip irdp
Mode Interface Config
To Next Page
Loading...
