Page I-37
Index
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
INDEX
A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W - X
T
T Interface (Trunk Interface) 2-62, 5-69
T1 Alarms 7-25
T1 Card (T1C) 1-7, 2-11, 2-49
alarms 7-25
capacity 2-50
circuits 2-50, 2-58
configuration and programming 6-126
connecting two systems 3-70
connection to MDF 3-31, 3-32, 3-36, 3-37
DB15 connector 2-56
dual bantam jack 2-56
error diagnostics 2-58
error thresholds 2-58
firmware 2-51
illustration 3-125
LEDs 2-56
make-busy switch 2-56
red alarm 7-19
reference clock 2-57
serial port 2-44, 2-56
span jack 2-56
testing 2-56
with Primary Rate Interface (PRI) Daughter card 2-52
T1 Card (T1C) And Primary Rate Interface (PRI) Daughter Card 3-124
T1 Cards (T1Cs) 2-49
T1 Cards (T1Cs) And T1/E1/PRI Cards 2-49
T1 Cards (T1Cs), E1/PRI Cards (E1/PRIs), and T1/E1/PRI Cards 2-49
T1 Cards on an Axxess Network 2-55
T1 Connections A-2
T1 Gain Control (TGC) Daughter Card 2-52, 3-124
T1 Network Clock Card (NCC) 2-55
T1 Networking A-7
hardware installation A-7
programming A-8
T1 OPX Disconnect Flag 5-57
T1 or E1 Card (T1C/E1C) and Primary Rate Interface (PRI) Daughter
Card 3-124
T1 or E1 Circuits 6-126
T1 or E1/PRI Network Clock Card (NCC) 2-55
T1 Programming A-8
T1 Report 6-339
T1 Status 6-127
T1 Trunks 2-8, 2-49, 5-54, 5-55, 5-56
applications 5-56
busyout switch timeout timer 6-329
cabling 2-54, 3-31, 3-32, 3-36, 3-37
clock 2-50, 2-57, 6-112
connecting two systems 3-70
CSU 2-49
error thresholds 6-112
ESF/D4 2-50, 2-57
fractional 2-49, 5-55
framing type 2-50, 2-57, 5-60
installation 3-5, 3-8, 3-12, 3-22
interface to public network 2-49
line build-out 2-49, 2-57, 5-60
master/slave clock 2-50, 2-57
network clock on CPU020/PCM-D 2-30, 2-55, 3-91
primary rate 5-55
reference clock 5-60
timers 5-60, 6-329
zero code suppression 5-60
T1 Trunks and Primary Rate T1 Trunks 5-55
T1 Trunks and Primary Rate T1 Trunks (U.S. Only) 5-55
T1, T1/PRI, or E1/PRI Card Configuration and Programming 6-126
T1/E1 Diagnostics 6-127
T1/E1/PRI Card 2-49, 3-126
see also T1 Card (T1C) 2-49
configuration and programming 6-126
DTMF dialing flag 6-260
illustration 3-128
installation 3-126
T1/E1/PRI Cards 2-54
T1/PRI Card
connection to MDF 3-31, 3-32, 3-36, 3-37
illustration 3-125
T1/E1/PRI card 1-6, 1-7, 2-8
T1/PRI Or T1/E1/PRI Cards A-24
T1/PRI or T1/E1/PRI Cards A-24
T1/PRI Trunks Terminated On
an RJ-type block 3-32
RJ48C jacks
away from the MDF 3-31
near the MDF 3-31
T1C, E1/PRI, or T1/E1/PRI Cards Features 2-56
T1C, E1/PRI, or T1/E1/PRI Cards on a Network 2-55
TAPI 5-147, 6-227
TCP F-20
TCP 80 F-20
TCP Call Control Port 6-175
TCP/IP
network 2-93, 3-234, 4-8, 4-15, 6-395
networking 4-15
TCP/IP Networking 4-15
TCP/IP Socket Connections C-15
Technical Support 7-107
TEI (Terminal Endpoint Identifier) 3-135, 6-140
Telnet Connection Method 7-74
Temperature 2-21
Template, Keymap 5-132, 6-308
Ten Emergency Numbers 5-114
Terminal Adaptor (TA) 2-61, 5-68
Terminal Blocks 2-7
Terminal Endpoint Identifier (TEI) 3-135, 6-140
Terminal Equipment (TE) 2-61, 5-68
Terminating
a data call 5-272
the cables at station locations 3-18
Terminating a Data Call 5-272
Terminating the Cables at Station Locations 3-18
Terminology 5-62, F-2
Test Menu 6-32
Testing Equipment for T1C 2-56
Tests 6-33
The * Button 2-32, 7-88
Thermistors 2-41
To Next Page
Loading...
