Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-6
v1.0, July 2010
shutdown
This command disables a port.
no shutdown
This command enables a port.
shutdown all
This command disables all ports.
Note: You can use the shutdown command on physical and port-channel (LAG)
interfaces, but not on VLAN routing interfaces.
Default enabled
Format shutdown
Mode Interface Config
Format no shutdown
Mode Interface Config
Note: You can use the shutdown all command on physical and port-channel (LAG)
interfaces, but not on VLAN routing interfaces.
Default enabled
Format shutdown all
Mode Global Config
To Next Page
Loading...
