8-1
v1.0, July 2010
Chapter 8
Quality of Service (QoS) Commands
This chapter describes the Quality of Service (QoS) commands available in the managed switch
CLI.
The QoS Commands chapter contains the following sections:
• “Class of Service (CoS) Commands” on page 8-2
• “Differentiated Services (DiffServ) Commands” on page 8-8
• “DiffServ Class Commands” on page 8-10
• “DiffServ Policy Commands” on page 8-19
• “DiffServ Service Commands” on page 8-25
• “DiffServ Show Commands” on page 8-26
• “MAC Access Control List (ACL) Commands” on page 8-32
• “IP Access Control List (ACL) Commands” on page 8-37
• “IPv6 Access Control List (ACL) Commands” on page 8-44
• “Auto-Voice over IP Commands” on page 8-48
Note: The commands in this chapter are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
To Next Page
Loading...
