Managed Switch CLI Manual, Release 8.0.3
Quality of Service (QoS) Commands 8-24
v1.0, July 2010
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a case-
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of
policy is specific to the inbound traffic direction as indicated by the in parameter.
no policy-map
This command eliminates an existing DiffServ policy. The <policyname> parameter is the
name of an existing DiffServ policy. This command may be issued at any time. If the policy is
currently referenced by one or more interface service attachments, this delete attempt fails.
Format police-simple {<1-4294967295> <1-128> conform-action {drop | set-
prec-transmit <0-7> | set-dscp-transmit <0-63> | set-cos-transmit
<0-7> | transmit} [violate-action {drop | set-prec-transmit <0-7>
| set-dscp-transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
Note: The CLI mode is changed to Policy-Map Config when this command is
successfully executed..
Format policy-map <policyname> in
Mode Global Config
Format no policy-map <policyname>
Mode Global Config
To Next Page
Loading...
Need help?
General
