Managed Switch CLI Manual, Release 8.0.3
Quality of Service (QoS) Commands 8-33
v1.0, July 2010
mac access-list extended
This command creates a MAC Access Control List (ACL) identified by <name>, consisting of
classification fields defined for the Layer 2 header of an Ethernet frame. The <name> parameter
is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC
access list.
If a MAC ACL by this name already exists, this command enters Mac-Access-List config mode to
allow updating the existing MAC ACL.
no mac access-list extended
This command deletes a MAC ACL identified by <name> from the system.
mac access-list extended rename
This command changes the name of a MAC Access Control List (ACL). The <name> parameter
is the name of an existing MAC ACL. The <newname> parameter is a case-sensitive
alphanumeric string from 1 to 31 characters uniquely identifying the MAC access list.
This command fails if a MAC ACL by the name <newname> already exists.
Note: The CLI mode changes to Mac-Access-List Config mode when you successfully
execute this command.
Format mac access-list extended <name>
Mode Global Config
Format no mac access-list extended <name>
Mode Global Config
Format mac access-list extended rename <name> <newname>
Mode Global Config
To Next Page
Loading...
Need help?
General
