Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-25
v1.0, July 2010
no user
Use this command to delete a user from the local user database. If the user has an existing session,
it is disconnected.
user name
Use this command to modify the user name for a local captive portal user. <1-128> is the
user ID and the name is the user name in the range of 1-32 characters. The local user must
be exist before execute this command. You can create the local user using
user password
first.
user group
Use this command to associate a group with a captive portal user. A user must be associated with
at least one group so the last group cannot be dis-associated. <1-128> is the user ID and <1-10> is
the group ID.
Format user user-id password { password | encrypted enc-password }
Mode Captive Portal Configuration mode
Format no user user-id <1-128>
Mode Captive Portal Configuration mode
Format user <1-128> name name
Mode Captive Portal Configuration mode
Default 1
Format user <1-128> group <1-10>
Mode Captive Portal Configuration mode
To Next Page
Loading...
