Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-62
v1.0, July 2010
no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface
Config mode) or all interfaces (Global Config mode). If an interface which has GARP enabled is
enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is
disabled on that interface. GARP functionality is subsequently re-enabled if routing is disabled
and port-channel (LAG) membership is removed from an interface that has GARP enabled.
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all
interfaces. If an interface which has GARP enabled is enabled for routing or is enlisted as a
member of a port-channel (LAG), GARP functionality is disabled. GARP functionality is
subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default disabled
Format set gmrp adminmode
Mode Privileged EXEC
Format no set gmrp adminmode
Mode Privileged EXEC
Default disabled
Format set gmrp interfacemode
Mode • Interface Config
• Global Config
To Next Page
Loading...
