- 981 -
TPOS01(FunctionID:513001)
Change logic about select fail factor
Change logic about execute command fail
factor
Change logic about P1 direction execute
output
Change logic about P2 direction execute
output
Change logic about P3 direction execute
output
Change logic about cancel command fail factor
Capable control direction
Operation Time Measurement enable
!Note: The user can enter a preferred setting name using GR-TIEMS.
Note: The TPOS function is available for a 2
nd
Device and other devices. We have
omitted the others because this will be the same as the 1
st
device with the
exception of the device number.
To Next Page
Loading...
