Toshiba GR200 Series - (i)-3 List Selection Mode: The “List Selection Mode” is composed of main-setting-screens and selection-list-screens as shown in Figure 12.5-5. In the main-setting-screen, the setting name and the selected item are displayed. Press the key ENTER to beg...

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1454 -
displayed on two lines.
Figure 12.5-3 Display Example of Switch Setting Mode
To begin the setting process, press the key ENTER. Once the setting is changed,
the [*] mark will appear alongside the name of the setting. When the change is
canceled or confirmed, the [*] mark will disappear automatically. Figure 12.5-4
shows the operation of the switch setting mode.
Figure 12.5-4 Operation of Switch Setting Mode
Note: The meaning of settings and their setting process are beyond the scope of this
section. The above figure is provided by way of example. The user should confirm
setting values after making any changes to their values. For verification, refer to
“Confirmation of Setting” discussed later.
List Selection Mode: The “List Selection Mode” is composed of main-setting-
screens and selection-list-screens as shown in Figure 12.5-5. In the main-
OC1
10:48 24/56
_OC1-VTFBlk +
Non
OC1-UseFor +
Trip
OC1-OPMD +
3POR
Before Changing Setting
After Changing
OC1
10:48 24/56
*OC1-VTFBlk +
Block
OC1-UseFor +
Trip
OC1-OPMD +
3POR
OC1
10:48 24/56
_OC1-VTFBlk +
Non
OC1-UseFor +
Trip
OC1-OPMD +
3POR
OC1
10:48 24/56
OC1-VTFBlk +
Non
OC1-UseFor +
Trip
OC1-OPMD +
3POR
OC1
10:48 24/56
*OC1-VTFBlk +
Block
OC1-UseFor +
Trip
OC1-OPMD +
3POR
[
ENTER
]
[►] / [▼] /
[▲] / [◄]
[CANCEL]
[ENTER]
[CANCEL]
OC1
10:48 24/56
*OC1-2fBlk +
Block
OC1-UseFor +
Trip
OC1-OPMD +
3POR
[►] / [▼] /
[▲] / [◄]
[ENTER]
[▼]
[▲]
OC1
10:48 24/56
*OC1-2fBlk +
Block
_OC1-UseFor +
Trip
OC1-OPMD +
3POR