Toshiba GR200 Series - 6.1 Overview of GR-TIEMS

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1115 -
Overview of GR-TIEMS
When engineering, monitoring, record viewing, and test support functions are required in the
IED, the user can handle these advanced and integrated functions using GR-Series Toshiba
IED Engineering and Monitoring Software (GR-TIEMS). The GR-TIEMS should be installed
into a PC prior to engineering. After that, the user can view the IED states (Table 6.1-1) on a
PC screen connected with the IED. The user can also program the IED using the GR-TIEMS.
Figure 6.1-1 GR-TIEMS® screen on PC
Table 6.1-1 Information on the GR-TIEMS
Information
Displaying format
Display of voltage and current waveform
Oscillograph, vector display
Symmetrical component analysis
On arbitrary time span
Harmonic analysis
On arbitrary time span
Frequency analysis
On arbitrary time span
The GR-TIEMS is software to retrieve and analyze power system quantities, fault and
event records. The user can change the settings in the respective IEDs when the PC is
connected with the IED via a USB or a LAN. For more information in the GR-TIEMS
operations, see separate manual “ Operation manual GR-TIEMS (6F2M1082) ”.