Toshiba GR200 Series - (ix) Setting names

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 880 -
Signal Number
Signal Name
Description
512001 8003021E81
DPOS02_FEC_OK_CS
DPOS02 Off-direction execute command
512001 8003031E81
DPOS03_FEC_OK_CS
DPOS03 Off-direction execute command
…
….
….
512001 8003481E81
DPOS72_FEC_OK_CS
DPOS72 Off-direction execute command
Table 4.8-20 PLC monitoring points (Output signals for response)
Signal Number
Signal Name
Description
512001 8003011E93
DPOS01_EX_CMP
DPOS01 completed control
512001 8003021E93
DPOS02_EX_CMP
DPOS02 completed control
512001 8003031E93
DPOS03_EX_CMP
DPOS03 completed control
…
…
…
512001 8003481E93
DPOS72_EX_CMP
DPOS72 completed control
512001 8603011E91
DPOS01_EX_FFL
DPOS01 failed control
512001 8603021E91
DPOS02_EX_FFL
DPOS02 failed control
512001 8603031E91
DPOS03_EX_FFL
DPOS03 failed control
….
….
….
512001 8603481E91
DPOS72_EX_FFL
DPOS72 failed control
(ix) Setting names
Note: The “xx” of “DPOSxx” represents the DPOS function number. (e.g., if the DPOS03
is considered, the “xx” is equal to “03”. The suffix “xx” can be represented by “01”
to “72”.)
Table 4.8-21 Setting of Operate in DPOSxx
Setting Name
Description
Default
Setting item or value
DPOSxx-PLSM
Methods of command output(DPOS1-72)
Fix
Fix/Var/Latch
DPOSxx-CPW
Duration of command output(DPOS1-72)
1.0[sec]
0.1~50.0[sec]
DPOSxx-RST
Detection time for terminating control (DPOS1-72)
30.0[sec]
0.1~100.0[sec]
DPOSxx-LGCTRCON
Logic selector for operate condition (DPOS01-72)
Fixedlogic
Fixedlogic/PLC
DPOSxx-LGCFEXOT
Logic selector for command output (DPOS01-72)
Fixedlogic
Fixedlogic/PLC
DPOSxx-CTREN
Activate control function of DPOS01-72
On
Off / On
DPOSxx-LGEXFFCT
Logic selector for operate condition (DPOS01-72)
Fixedlogic
Fixedlogic / PLC