Toshiba GR200 Series - (iii)-4 IRIG SYNC menu; (iv) Display format; (iv)-1 Date format menu

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1477 -
IRIG SYNC menu
When the “IRIG SYNC” is set to On in Time Sync menu, the user can choose IRIG signal for
the synchronization.
Figure 12.7-11 IRIGSYNC
(1) Set On if IRIG-B data is generated in IEEE C37.118/IRIG-B000
format. On the other hand, set Off if the IRIG-B is generated with
absence the C37.118.
(iv) Display format
Display format of time in the IED can be selected in Display format screen. All time formats
will be displayed according to Date_fmt setting. The IED provides different formats to display
the date. Figure 12.7-12 shows display format menu:
Figure 12.7-12 Display format menu
Display Format sub-menu is composed of Date_fmt menu, Date_delimiter setting
Time_delimiter setting and Sec_delimiter setting.
Date format menu
Figure 12.7-13 Date Format
(1) Move cursor to “Date_fmt”; and press ENTER.
(2) Select desired format by moving cursor.
IRIG SYNC
10:48 1/2
USE_BCDYEAR +
Off
USE_LOCALTIME +
Off
Display Format
10:48 1/4
_Date_fmt +
YYYYMMDD
Date_delimiter +
-
Time_delimiter +
:
Date_fmt
10:48 1/3
_YYYYMMDD
MMDDYYYY
DDMMYYYY
Display Format
10:48 1/4
Date_fmt +
YYYYMMDD
Date_delimiter +
-
Time_delimiter +
: