Toshiba GR200 Series - (iii) Disturbance Record; (iii)-1 Display of disturbance Record

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1442 -
(iii) Disturbance Record
Disturbance Records can be displayed graphically on the PC screen by using GR-TIEMS. The
IED screen displays only the recorded date and times, which are stored in the IED as the entire
disturbance data, as shown in the following example:
Figure 12.3-9 Display of Disturbance Record
The following shows the steps to display and erase disturbance records.
Display of disturbance Record
Figure 12.3-10 shows the steps to display and erase event records. To clear all records, refer to
section (i)-3.
Figure 12.3-10 Disturbance
1). Move cursor to Disturbance Record sub menu and press ►.
2). Disturbance Record screen is displayed. Press ► at the Record List
sub menu.
3). Press ▲ or ▼ to move display items.
Disturbance record
10:48 1/6
#
1 2012-07-25
10:48:04.223
#2 2012-07-21
01:15:55.018
#3 2012-07-20
13:11:29.621
Record
10:48 2/6
Fault Record >
Event Record 1 >
Event Record 2 >
Event Record 3 >
_Disturbance Record >
Clear all Records +
Disturbance Record
10:48 1/2
_Record List >
Clear Records +
Disturbance Record
10:48 1/6
#1 2012-07-25
10:48:21.223
#2 2012-07-21
01:15:55.018
#3 2012-07-20
13:11:29.621