Toshiba GR200 Series - (i)-1 Defining SBO mode; (i)-2 Defining DIR mode

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 899 -
Defining SBO mode
Figure 4.8-53 exemplifies the DPOS01 logic node saved as “CSWI4”. In the SBO mode, the user
should select the following items for the “CSWI4$Pos” using GR-TIEMS:
✓ SBOw
✓ Oper
✓ Cancel
✓ Origin
✓ stSeld
✓ sboClass† (choice ”operate-once”)
✓ ctlmodel (choice ”SBOes or SBOns”)
†”sboClass” can be found by scrolling down.
Figure 4.8-53 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 4.8-54 exemplifies the DPOS01 logic node saved as save as “CSWI4”. In the DIR mode,
the following three items should be selected using GR-TIEMS.
✓ Oper
✓ origin
✓ ctlmodel (choice ”DOes or DOns” )
Figure 4.8-54 LN editing screen for DIR mode (for example)