Toshiba GR200 Series - (i)-4 Signal Selection Mode: Figure 12.5-6 shows the steps to select a signal.

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1455 -
setting-screen, the setting name and the selected item are displayed. Press
the key ENTER to begin the setting process; the screen for selection list will
appear. Once a setting has been changed, the [*] mark will appear alongside
the name of the setting. When the change is canceled or confirmed, the [*]
mark will disappear automatically.
Figure 12.5-5 Operation of List Selection Mode
Signal Selection Mode: Figure 12.5-6 shows the steps to select a signal.
Figure 12.5-6 Operation of signal selection
OC1
10:48 23/56
_OC1-2fBlk +
Non
OC1-VTFBlk +
Non
OC1-UseFor +
Trip
OC1-2fBlk
10:48 1/3
_Non
Block-3P
Block-PerP
OC1-2fBlk
10:48 2/3
Non
_Block-3P
Block-PerP
[
ENTER
]
[▼]
[CANCEL]
[ENTER]
[CANCEL]
OC1
10:48 23/56
*OC1-2fBlk +
Block-3P
OC1-VTFBlk +
Non
OC1-UseFor +
Trip
[▲]
[▼]
[▲]
OC1
10:48 23/56
*OC1-2fBlk +
Block-3P
_OC1-VTFBlk +
Non
OC1-UseFor +
Trip
F1 Key
10:48 1/2
_Signal +
Assign Signal
Logic +
Toggle
Select Function
10:48 2/128
No assign
_423100 >
423101 >
423102 >
423103 >
423104 >
Select Element
10:48 2/128
No assign
_AF00001001
AF00002001
AF00003001
AF00004001
AF00005001
[►]
[CANCEL]
[ENTER]
F1 Key
10:48 1/2
*Signal +
423100 AF00001001
Logic +
Toggle
[◄]
[ENTER]
[CANCEL]