Toshiba GR200 Series - 11.2.5 Settings

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1339 -
11.2.5 Settings
Setting of TCPIP_DRV (Function ID: 230201)
Setting item
Range
Units
Contents
Default setting value
Notes
Port A
IPADDRESS1
0 – 255
–
First IP address in the local IED
192.168.1.11
SUBNETMASK1
0 – 255
–
Subnet mask
255.255.255.1
GATEWAY1
0 – 255
–
Gateway
192.168.1.1
Port B
IPADDRESS1
0 – 255
–
Second IP address in the local IED
192.168.1.11
SUBNETMASK1
0 – 255
–
Subnet mask
255.255.255.1
GATEWAY1
0 – 255
–
Gateway
192.168.1.1
Setting of PRP_HSR(Function ID: 342001)
Setting item
Range
Units
Contents
Default setting value
Notes
RedundantMode
PRP/HSR/RSTP
–
Selection of either PRP/HSR/RSTP
PRP
P
R
P
&
H
S
R
LRE_PortA_EN
Off / On
–
Administrative action at PortA
On
LRE_PortB_EN
Off / On
–
Administrative action at PortB
On
LifeCheckInterval
100-100000
ms
How often the node sends PRP_Supervision
2000ms
SV_Dst_MACAddr
01-15-4E-00-01-00
to
01-15-4E-00-01-FF
–
Destination Mac address of supervision frame
01-15-4E-00-01-00
SV_VLAN_EN
Off / On
–
Enable or Disable VLAN of supervision frame
Off
SV_VLAN_ID
0-4094
–
A 12-bit field specifying the VLAN to which the
frame belongs
0
SV_VLAN_Priority
0-7
–
VLAN Priority of supervision frame
0
EntryForgetTime
100-10000
ms
Entry is removed from the duplicate table
400
R
S
T
P
BridgeHelloTime
1 - 10
s
Sending interval of BPUD from Root Bridge
2
BridgeMaxAge
6 - 40
s
Receiving interval of BPUD
20
BridgeFwdDelay
4 - 30
S
Waiting times for Listening and Learning
15
BridgePriority
0-61440 (4096steps)
-
Priority number in Bridge
32768
PortA_AdminEdge
Off / On
-
Operation of ‘Edge port’ at PortA
Off
PortA_AutoEdge
Off / On
-
Auto detection for ‘Edge port’ at PortA
On
PortA_PathCost
1–200000000
-
Root Path Cost at PortA
20000
PortA_Priority
0 – 240 (16steps)
-
Priority number at PortA
128
PortB_AdminEdge
Off / On
-
Operation of ‘Edge port’ at PortB
Off
PortB_AutoEdge
Off / On
-
Auto detection for ‘Edge port’ at PortB
On
PortB_PathCost
1–200000000
-
Root Path Cost at PortB
20000
PortB_Priority
0 – 240 (16steps)
-
Priority number at PortB
128
Setting of REDLAN(Function ID: 340001)
Setting item
Range
Units
Contents
Default setting value
Notes
RedundantMode
Fixed /
Hot_Standby
–
Enabling Hot-standby operation
Fixed
Setting of HOTST(Function ID: 341001)
Setting item
Range
Units
Contents
Default setting value
Notes
PrimaryPort
None / Port1 (Port
A) / Port2 (Port B)
–
Selection of the primary port
None
DownTime
0 – 10000
ms
Determination time for link-down
5
UpTime
0 – 10000
ms
Determination time for link-up
5