Toshiba GR200 Series - (iii) Communication; (iii)-1 LAN sub-menu: the communication port name and status are shown in a line. When the IED has single communication module, or when the IED has communication modules but a communication module is allowed to operate in the IED, an operation status...

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1445 -
Figure 12.4-3 shows the steps required to display the status of the binary inputs and outputs.
Figure 12.4-3 Steps to display Binary I/O status
(iii) Communication
The “Communication” sub-menu provides several sub-menus as shown in Figure 12.4-4.
Figure 12.4-4 Menu hierarchy for Communication sub-menu
The display structure for each sub-menu is explained in the following sections:
LAN sub-menu: the communication port name and status are shown in a line.
When the IED has single communication module, or when the IED has
communication modules but a communication module is allowed to operate in
the IED, an operation status of the communication ports is shown, as shown
in Figure 12.4-5.
“LAN” sub-menu can display “PortStatus” and “NetMonitor status”. If
“NetMonitor” is running (active), the LCD screen will display a “>”mark.
Main Menu
10:48 2/9
Record >
_Monitoring >
Setting >
IO setting >
Time >
Test >
Monitoring
10:48 2/14
Statistics >
Metering >
_Binary I/O >
Operation Time >
Relay Element >
Communication >
Slot#1
10:48 1/12
B
I1 0 CB1 contact
BI2 0 DC power sup.
BI3 0 Trans-T Comm1
BI3 0 Trans-T Comm2
BI4 0 ARC-Block1
BI5 0 Indi. Reset
Binary I/O
10:48 1/4
_Slot#1 >
Slot#2 >
Slot#3 >
Slot#4 >
Slot#1
10:48 2/12
BI1 0 CB1 contact
BI2 0 DC power sup.
BI3 0 Trans-T Comm1
BI3 0 Trans-T Comm2
BI4 0 ARC-Block1
BI5 0 Indi. Reset
►
◄
►
◄
►
◄
▼
▲
Monitoring
Communication
LAN
61580STAT
Sub-menu sub-menu sub-menu