Toshiba GR200 Series - (i)-2 ActiveSyncSrc menu; (ii) Time zone

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1474 -
ActiveSyncSrc menu
ActiveSyncSrc can be shown by the following procedure.
Figure 12.7-4 ActiveSync
(1) Move cursor to the [ActiveSyncSrc] menu and press ►.
*Note: When the active synchronizing source is not SNTP, the > is
not shown in the screen.
(2) The ActiveSyncSrc screen shows the active IP address of active
SNTP server.
(ii) Time zone
The user can input time zone designated by UTC in Time zone screen. Time zone according as
local area for the IED should be set. Figure 12.7-5 shows the Time Zone screen:
Figure 12.7-5 Time zone setting screen
Figure 12.7-6 TimeZone
(1) Move cursor to the Time zone menu and press ENTER.
Time zone can be set by 0.25 hour. The user has to fill the Time zone
in accordance with UTC (Coordinate Universal Time).
Clock
10:00 1/2
[Time] +
2012-11-21 10:00:05
[Format]
YYYY-MM-DD HH:mm:ss
_[ActiveSyncSrc] >
SNTP
ActiveSyncSrc
10:48
192. 168. 0. 100
192. 168. 0. 101
*192. 168. 0. 102
192. 168. 0. 103
Time Zone
10:48 1/1
_Time zone +
0.00hour
Time Zone
10:48 1/1
Time zone +
0.00hour