Toshiba GR200 Series - (iii) Time synchronization; (iii)-1 TimeSyncSrc menu

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1475 -
(iii) Time synchronization
Time synchronization source can be selected in Time synchronization screen. The
synchronization function can be activated by configuration of the On/Off switch in this menu.
Figure 12.7-7 shows the configuration screen for the time synchronization function:
Figure 12.7-7 Time synchronization setting
The following shows how to operate in this screen.
TimeSyncSrc menu
Time SyncSrc (Time Synchronization Source) can be changed by the following procedure.
Figure 12.7-8 TimeSyncSrc
(1) Move cursor to the TimeSyncSrc menu and press ENTER.
(2) The TimeSyncSrc menu is composed of SNTP, BI, and IRIG-B.
Note: When “---” is selected, it means that time synchronization
is not operated.
By using time synchronization via Ethernet with a SNTP server, the user can connect up
to a maximum of four SNTP servers. If more than one SNTP is used, the priority of the servers
can be decided in ascending order of synchronized stratum value (in order of higher-accuracy)
and select the server with the smallest value.
Time Sync
10:48 1/3
_TimeSyncSrc +
SNTP
SNTP +>
On
BI SYNC +>
Off
TimeSyncSrc
10:48 1/4
---
_SNTP
BI
IRIG-B
Time Sync
10:48 1/3
TimeSyncSrc +
SNTP
SNTP +>
On
BI SYNC +>
Off
IRIG SYNC +>
Off