Toshiba GR200 Series - 9.10 Setting

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1204 -
Setting
Metering settings in MES (Function ID: 710001)
Setting item
Range
Unit
s
Contents
Default
setting value
Notes
Display Value
Primary/Secondary
–
Display selection of primary or secondary
Primary
Power
Send/Receive
–
Power flow definition (Supply or absorb)
Send
Current
Lead/Lag
–
The angle compared with the voltage
Lead
PF Sign
AP/AP+RP
–
Decision of the sign of the power factor
AP+RP
I-Valid Level
0.10 to 5.00
%
Cutting off small entering current
4.00
V-Valid Level
0.10 to 5.00
%
Cutting off small applied voltage
0.30
I-Display Unit
A/kA
–
Current shown in Ampere or Kilo-Ampere
kA
V-Display Unit
V/kV
–
Voltage shown in Volt or Kilo-Volt
kV
P-Display Unit
kW/MW
–
Active power shown in Kilo- or Mega-watt
MW
Q-Display Unit
kvar/Mvar
–
Reactive power shown in Kilo- or Mega-var
Mvar
S-Display Unit
kVA/MVA
–
Apparent power shown in Kilo- or Mega-
VA
MVA
Statistics settings in MES (Function ID: 710001)
Setting item
Range
Unit
s
Contents
Default
setting value
Notes
Wh-Display Unit
kWh/MWh
–
Watt-hour shown in Kilo- or Mega-Wh
MWh
varh-Display Unit
kvarh/Mvarh
–
Var-hour shown in Kilo- or Mega-varh
Mvarh
Demand settings in MES (Function ID: 712001)
Setting item
Range
Unit
s
Contents
Default
setting value
Notes
Demand_period
1min / 5min /
10min / 15min /
30min / 60min
–
Period of demand calculation
10min
Dead-band setting in MES (Function ID: 710001)
Setting item
Range
Unit
s
Contents
Default
setting value
Notes
ISD
0.00 to 50.00
%
Sending Dead Band in current
5.00
VSD
0.00 to 50.00
%
Sending Dead Band in voltage
0.60
P/Q/SSD
0.00 to 50.00
%
P/Q/S Sending Dead Band
5.00
PFSD
0.00 to 1.00
–
PF Sending Dead Band
0.02
FSD
0.00 to 50.00
%
F Sending Dead Band
0.50
Wh/varhSD
0.0 to 999.9
–
Wh/varh Sending Dead Band
1.0
PhaseSD
0.0 to 90.0
deg
Phase Sending Dead Band
0.5
PeriodSD
0 to 4
–
Period of Sending Dead band
0
dVSD
0.00 to 50.00
%
dV Sending Dead Band
0.60
Setting of Test in MES (Function ID: 710001)
Setting item
Range
Unit
s
Contents
Default
setting value
Notes
Commercial Test
OFF / ON
–
Commercial Test Switch
OFF / ON