Toshiba GR200 Series - (v)-3 Accumulated Time sub-menu: Total time for which the IED has been running is shown in “d (date) h (hour) m (minute)” format. The user can clear the total time value by clear operation (reset), which is shown in Figure 12.4-14.; (vi) GOOSE monitoring

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1450 -
Figure 12.4-13 Steps for changing the counter number
Accumulated Time sub-menu: Total time for which the IED has been running
is shown in “d (date) h (hour) m (minute)” format. The user can clear the total
time value by clear operation (reset), which is shown in Figure 12.4-14.
Figure 12.4-14 Display for Accumulated Time
(vi) GOOSE monitoring
The status of the GOOSE subscription information is shown for each record-unit, as shown in
Figure 11.3-33. Each IED name (for example, “GRx200-11-603”) has been defined in the
Main Menu
10:48 2/10
Record >
_Monitoring >
Setting >
IO Setting >
Time >
Test >
Counter
10:48 1/32
Count1(No Assign) +
0
Count2(No Assign) +
0
Count3(No Assign) +
0
Counter
10:48 1/32
Count1(No Assign) +
0
Count2 (No Assign) +
1
Count3 (No Assign) +
0
Counter
Change?
ENTER=Yes CANCEL=No
Monitoring
10:48 1/8
Metering >
Binary I/O >
Communication >
Relay Element >
_Statistics >
GOOSE Monitoring >
Statistics
10:48 1/3
Power value >
_Counter >
Accumulated Time >
►
◄
►
◄
►
◄
ENTER
ENTER
CANCEL
ENTER
The data has been revised.
Revise the data
Counter
10:48 1/32
Count1(No Assign) +
0
COUNT2 (No Assign) +
1
COUNT3 (No Assign) +
0
Accumulated Time
Reset?
ENTER=Yes CANCEL=No
Accumulated Time
10:48 1/1
_ACT_TIME +
234d 23h 39m
ENTER
CANCEL