Toshiba GR200 Series - 8.3.7 Interpolation of transferred data

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1169 -
Figure 8.3-4 Screen shot from GR-TIEMS
8.3.7 Interpolation of transferred data
Information data will be recorded in COMTRADE every cycle defined by the setting [Sampling
Rate]. When remote information is distributed by the telecommunication†, the recorder also
records the remote data along the local data in the COMTRATE. If the remote data is
transferred at different cycle, the recorder cannot record the remote data with own [Sampling
rate] (for example, if remote data is received at every 30 electrical deg., the recorder cannot
record the remote and local data at the same time if the recorder operates in 7.5 deg. cycle). In
order that the recorder can have the coordination between different cycles, the disturbance
recorder can generates complementary data for the data generated at different cycle. The user
should set On for the setting [Interpolate mode] for this operation.
†Note: For the remote information, see Chapter Relay application: Transmission control
function (DIF_COMM).