Toshiba GR200 Series - 2.38.6 User logic switches

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 541 -
2.38.6 User logic switches
PROT_COMMON function has four general-purpose switches; they are ready for the user’s
PLC logic. For example, the user can select a mode using [UserLogicSW1] when the PLC#1
logic operates in S1 mode (Purposes: the user can select one of modes in accordance with the
time, location, condition, etc.). Figure 2.38-6 shows the switches have connecting points for the
user’s logics.
8200001C62
S3
UserLogicSW1
USR_LG1_S1
Connections made by the user
8100001C61
S2
8000001C60
S1
USR_LG1_S2
USR_LG1_S3
xxxxxxxx1 XXXX_XXXX1
xxxxxxxx2 XXXX_XXXX2
xxxxxxxx3 XXXX_XXXX3
PLC logic #1 made by the user
8200001C65
S3
UserLogicSW2
USR_LG2_S1
8100001C64
S2
8000001C63
S1
USR_LG2_S2
USR_LG2_S3
xxxxxxxx1 XXXX_XXXX1
xxxxxxxx2 XXXX_XXXX2
xxxxxxxx3 XXXX_XXXX3
PLC logic #2 made by the user
8200001C68
S3
UserLogicSW3
USR_LG3_S1
8100001C67
S2
8000001C66
S1
USR_LG3_S2
USR_LG3_S3
xxxxxxxx1 XXXX_XXXX1
xxxxxxxx2 XXXX_XXXX2
xxxxxxxx3 XXXX_XXXX3
PLC logic #3 made by the user
8200001C6B
S3
UserLogicSW4
USR_LG4_S1
8100001C6A
S2
8000001C69
S1
USR_LG4_S2
USR_LG4_S3
xxxxxxxx1 XXXX_XXXX1
xxxxxxxx2 XXXX_XXXX2
xxxxxxxx3 XXXX_XXXX3
PLC logic #4 made by the user
Figure 2.38-6 Mode selected with UserLogicSWs
Note: For more information about the PLC programing, see Chapter PLC function .