Toshiba GR200 Series - 6. PIXIT for Data set model; 7. PIXIT FOR SUBSTITUTION MODEL; 8. PIXIT FOR SETTING GROUP CONTROL MODEL

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1587 -
(PIXIT Ed.1&Ed.2)
6. PIXIT for Data set model
ID
Ed
Description
Value / Clarification
Ds1
1
What is the maximum number of data elements
in one data set (compare ICD setting)
Not limited by an internal
configuration parameter.
This IED does not have
CreateDataSet service. But any
DataSet can be defined by using
engineering tool. The maximum
number depends on the memory
size of IED.
Ds2
1
How many persistent data sets can be created by
one or more clients
(this number includes predefined datasets)
N.A.
Ds3
1
How many non-persistent data sets can be
created by one or more clients
N.A.
7. PIXIT FOR SUBSTITUTION MODEL
Not applicable
8. PIXIT FOR SETTING GROUP CONTROL MODEL
ID
Ed
Description
Value / Clarification
Sg1
1
What is the number of supported setting groups
for each logical device
8
Sg2
1,2
What is the effect of when and how the non-
volatile storage is updated
(compare IEC 61850-8-1 $16.2.4)
Just SelectActiveSG service will be
supported according to PICS.
When an IED receives correct
SelectActiveSG request, the IED
returns Response+ within 10
seconds. And the ActSG and
LActTm variable are updated
within 10 seconds after the
Response+. (These times are
typical values, and they depend on
IED types and its
configurations/settings.)
After changing setting group
number with LED panel, you can
see new setting group with
GetSGCBValue service.
Sg3
1
Can multiple clients edit the same setting group
N.A.
Sg4
1
What happens if the association is lost while
editing a setting group
N.A.
Sg5
1
Is EditSG value 0 allowed
N.A.
Sg6
2
When ResvTms is not present how long is an edit
setting group locked
N.A.
(PIXIT Ed.1&Ed.2)