Toshiba GR200 Series - (iii)-2 Clear of Disturbance Records

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1443 -
Clear of Disturbance Records
Figure 12.3-11 shows the steps to display and erase disturbance records. To clear all records,
refer to section (i)-3.
Figure 12.3-11 Clear records
1). Move cursor to Disturbance Record sub menu and press ►.
2). Disturbance Record screen is displayed. Press ENTER at the
Clear Records sub menu.
3). Clear all Disturbance records if ENTER is pressed. Back to
display of “Disturbance Record” directly if CANCEL is pressed.
Record
10:48 2/6
Fault Record >
Event Record 1 >
Event Record 2 >
Event Record 3 >
_Disturbance Record >
Clear all Records +
Disturbance Record
10:48 1/2
Record List >
_Clear Records +
Disturbance Record
Clear records?
ENTER=Yes CANCEL=No